Wireless WiFi Signal Hot Spot Detector Finder Ball Pen (Black)

Wireless WiFi Signal Hot Spot Detector Finder Ball Pen (Black)

Installation:

1) Holding the upper part and middle part of the pen with both hands respectively, unscrew the pen. You will see the battery chamber.2) Insert two AG13 batteries in the battery chamber with the negative end pointing inside.3) Holding the upper part and middle part of the pen with both hands respectively, screw the pen.Now you have finished installation of the battery, you can operate your product right now. 4. Operation:Pressing the switch, LED begins to flash. After several seconds, flashing stops and LED will display the signal strength of the current place.

Level 0	Red light	No signal
Level 1	One green light	Extremely weak signal
Level 2	Two green lights	Relative weak signal
Level 3	Three green lights	Relative strong signal
Level 4	Four green lights	Extremely strong signal

When the signal strength displayed is above level 1, the wireless network adapter of computers can connect to Access Points (AP) stably and continuously. If there is no password or authorization required, (or you have already got the password or the authorization), and AP has already been connected to internet, then you can connect to internet successfully through the AP. 5. Technical Specifications: 

Frequency	2.400~2.483GHz
Regulation	IEEE 802.11 b/g
Valid range	Indoors:10~30M   Outdoors: 100~150MMay vary according to surrounding environment and the power of AP
Operating Voltage	DC2.6~3.3V
Power source	2*AG13
Operating electric current	Maximum 35mA
Sleeping electric current	Maximum 10uA
Weight	35g
Dimension	φ14 X L138mm
Operating environment	Temperature0~40  Humid20%~80%RHwithout condensation
Preserving environment	Temperature-20~70 Humid10%~90%RHwithout condensation
Care and Cleaning	Using soft damp cloth (only with water, never with alcohol or organic solvent)

Wireless WiFi Signal Hot Spot Detector Finder Ball Pen (Black)